KSh0.00
Tie and Dye Kit 3pcs
KSh400.00
Our tie dye kits adopt environmental material, and are made with your child’s safety in mind already, non-toxic and tasteless, which ensures that different ages can enjoy the fun of dyeing clothing in a safe environment!
We highly recommend using natural fabrics, like cotton, silk, modal, and linen, since they display our colors the best.
Tye dye kits for clothing are also a great choice for large summer camps, parties, school events, family reunions, other group activities, and festival gifts for your relatives and friends.
(+800) 1234 5678 90 Start Live Chat
Low Prices
Price match guarantee
Guaranteed Fitment.
Always the correct part
In-House Experts.
We know our products
Easy Returns.
Quick & Hassle Free
Related products
- 1kg.
- Designed for casting, moulding and sculpting.
- For mixing, we suggest approximately 1 part water to 2 parts plaster, however this will vary with temperature of water used and prevailing weather conditions.
- Never use bare hands to mix or stir plaster.
- Water should always be added to the mixing tray first then sprinkle or sift plaster into the water in small quantities and gently mix with spatula. Tap sides to vibrate and release air bubbles. When mixture is a smooth, even consistency and a uniform light grey colour it is ready to pour into mould.
- Includes 12 vibrant colours: Titanium White, Lemon Yellow, Cadmium Yellow, Brilliant Red, Pink, Light Purple, Cerulean Blue, Light Green, Sap Green, Burnt Sienna, Lamp Black, Gold
- Mix colours for an even bigger palette
- Suitable for use on clothes, fabric shoes, tote bags, cushions and other DIY fashion and homewares
- Permanent once dry and machine washable once set using the instructions below
Directions:
- Wash and dry fabric
- Place a barrier such as cardboard or baking paper between the two sides to prevent paint from bleeding through
- Shake paint well before use
- Apply a thin, even coat with a paintbrush or sponge. Wait till dry, then add more layers until happy with opacityÂ
- Once dry, place a cloth over the design and iron for 3-5 minutes at 100 degrees Celsius (212 degrees F) to 'fix' your artwork.
- To wash, turn garment inside-out and wash on a cold cycle.
Handy hints:
- Paintâs thinner consistency is formulated to move with flexible surfaces (fabrics) without flaking off
- To build opacity layer paint, or mix in Titanium White (may alter colour slightly)
- Multiple layers may be needed to build up opacity, especially over dark fabrics
- Clean up with warm soapy water while paint is wet
Techniques:
- Glazes
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
- 10cm x 4.6m (3.9in x 14.8ft)
- Can cover any form
- Creates masks and sculptures
- Cut your strips to size, dip into warm water and apply to wire frames, cores or models.
- Build up the layers until you are happy with the strength of your project.
- Once dry, sand and paint. Setting times will vary due to thickness. When dry you can even try adding clear acrylic to make it water resistant.
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Arif Shop
Arif Accessories is a Kenyan-based company with a specialization in Trendy crafts & DIY Supplies.
We are the leading supplier of both home & Commercial Glue guns and glue sticks with over 7 years of experience.
Need Help?
Store Information
- Free delivery for all orders over Ksh. 10,000
Copyright 2024 ©Arif Shop. All right reserved.
Reviews
There are no reviews yet.