KSh14,700.00
Subtotal: KSh14,700.00
Your order qualifies for free shipping!
Subtotal: KSh14,700.00
Your order qualifies for free shipping!
Heat Gun
KSh850.00
Hot air gun for removing resin bubbles and can be used for creating ocean wave effects on your resin crafts.
This heat gun is heat resistant, lightweight, simple, and durable.
The mini heat gun can be used to heat shrinkable film, clay, embossed powder, and rubber stamps, remove old paintings, heat to shrink film, defrost and remove mud and dirt, etc.
(+800) 1234 5678 90 Start Live Chat
Low Prices
Price match guarantee
Guaranteed Fitment.
Always the correct part
In-House Experts.
We know our products
Easy Returns.
Quick & Hassle Free
Description
The mini heat gun can be used to heat shrinkable film, clay, embossed powder, and rubber stamps, remove old paintings, heat to shrink film, defrost and remove mud and dirt, etc.
Related products
- Carve, cut and smooth with the curved end. The Spearhead end cuts small straight lines and is perfect for creating fine details.This small metal brush creates multiple fine textured marks.
- Remove clay in square in large flat areas with the open loop end. Carve, cut and smooth with the curved end.
- These tool ends are the perfect size for hand drilling holes for salt and pepper shakers in green ware.
- The needle point end is ideal for placing delicate objects or scratching in fine details. Carve, cut and smooth with the curved end.
- This tool is often referred to as a spoolie. It is great for cleaning rough spots on green ware in delicate or hard to reach places.
- The curved tool has a small sharp blade which is great for removing small areas with straight edges. The angled end is great for cutting small detailed areas.
- The angled tool is invaluable for flattening areas in hard to reach places. The needle point can create small holes, texture marks or can assist in placement of small objects.
- Use the slightly forked end to create wood like texture or sgraffito effects. Spearhead ends cuts small straight lines and etches fine details.
- The curved blade with the flat end lifts small areas with straight edges. Use the slightly forked end to create wood like texture or sgraffito effects.
- The curved blade cuts, carves and smoothes clay. The large spearhead blade is great for deepening details and making longer cuts.
- 4 colours; cream, gold, green and pink
- 180gsm
- 12 Sheets which are tape bound
- 2mm (0.08in) thick backing board
- Practical tips on the inside cover
- Available in A3, A4 and A5
- Mont Marte Charcoal Products
- Mont Marte Graphite Products
- Mont Marte Coloured Pencils
- Mont Marte Pastel Pencils
- Mont Marte Skin Tints
- Mont Marte Soft Pastels
- Mont Marte Oil Pastels
- 1kg.
- Designed for casting, moulding and sculpting.
- For mixing, we suggest approximately 1 part water to 2 parts plaster, however this will vary with temperature of water used and prevailing weather conditions.
- Never use bare hands to mix or stir plaster.
- Water should always be added to the mixing tray first then sprinkle or sift plaster into the water in small quantities and gently mix with spatula. Tap sides to vibrate and release air bubbles. When mixture is a smooth, even consistency and a uniform light grey colour it is ready to pour into mould.
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Recently Viewed Products
- 4 colours; cream, gold, green and pink
- 180gsm
- 12 Sheets which are tape bound
- 2mm (0.08in) thick backing board
- Practical tips on the inside cover
- Available in A3, A4 and A5
- Mont Marte Charcoal Products
- Mont Marte Graphite Products
- Mont Marte Coloured Pencils
- Mont Marte Pastel Pencils
- Mont Marte Skin Tints
- Mont Marte Soft Pastels
- Mont Marte Oil Pastels
- USB mini electric drill for epoxy resin creations
- It can be used to create intricate and unique designs on your crafts
- It is easy to be used by both beginners and professional artists.
- 500ml bottle
- Good coverage
- Suitable for most painting surfaces
- Dries to a semi-matte finish
Arif Shop
Arif Accessories is a Kenyan-based company with a specialization in Trendy crafts & DIY Supplies.
We are the leading supplier of both home & Commercial Glue guns and glue sticks with over 7 years of experience.
Need Help?
Store Information
- Free delivery for all orders over Ksh. 10,000
Copyright 2024 ©Arif Shop. All right reserved.
Reviews
There are no reviews yet.